Engineering Guide to Semi-Tubular and Tubular Rivets
Structure, key parameters and four selection factors for semi-tubular and tubular rivets.
Semi-tubular rivets and tubular rivets are both fasteners that create a permanent joint through plastic deformation. They are widely used in electronics, home appliances, automotive components, hardware fittings and light structural assemblies. The main differences between them lie in the hollow structure of the rivet, the way it deforms during riveting, and the joint strength it suits.
1. Structure and performance
1. Semi-tubular rivets
Structure: The tail end of the rivet has a hole; most of the rivet from the head to the shank is solid.
Characteristics: During riveting the tail rolls outward easily, and a relatively low installation force is needed.
Applications: Hinges, brake components, home appliances, hardware and mechanical assemblies.
Advantages: A balance of joint strength, installation efficiency and production cost.
2. Tubular rivets
Structure: The shank has a deep hollow bore; in some designs the hollow extends to near the head.
Characteristics: Less material is used, and a lower riveting force is usually required.
Applications: Leather goods, textiles, electronic components, nameplates and light assemblies.
Advantages: Suited to thin materials and to applications with requirements for appearance, weight or low installation force.
2. Key engineering parameters
| Parameter | Semi-tubular rivet | Tubular rivet |
|---|---|---|
| Joint strength | Usually higher | Usually lower |
| Installation force | Low to medium | Usually low |
| Deformation when riveted | Tail rolls and flares | Wall flares or flanges |
| Material usage | Medium | Less |
| Suitable materials | Sheet metal, machine parts | Thin sheet, leather, fabric, etc. |
| Typical uses | Mechanical assembly, hardware components | Light assembly, decorative fixing |
Note: the above are general trends. Actual performance depends on rivet diameter, wall thickness, material, riveting method and the design of the parts being joined.
3. Four key factors in engineering selection
1. Joint strength
For joints carrying higher loads or subject to vibration or impact, evaluate semi-tubular rivets first; tubular rivets can be considered for light-load fixing.
2. Material thickness
Determine the specification from the total thickness of the materials being joined, the rivet length and the space available for forming, to avoid insufficient riveting or excessive deformation.
3. Installation process
Depending on whether manual, pneumatic or automatic riveting equipment is used, evaluate the installation force, tooling design, production cycle time and forming consistency.
4. Material and environment
Choose stainless steel, carbon steel, copper or aluminium according to requirements for corrosion resistance, weight, appearance and service temperature.
4. Selection conclusions
Consider semi-tubular rivets first when you need a more reliable mechanical joint, higher assembly efficiency and controlled tail forming.
Consider tubular rivets first for light-load fixing, joining thin materials, low installation force or where light weight matters.
Formal design validation: critical joints should undergo pull-out, shear, torque (where applicable) and fatigue testing, and the forming quality after riveting should be verified.
